Now taking orders on Monty guitar wrap kits. Comes with top horn, pickguard and lower graphics. Made out of 5-7 year outdoor vinyl.
$30 shipped (U.S. Only)
*Note - the pickguard pictured has a different color for test purposes only. The kit will not vary in color.




Application: I've been applying vinyl for a while now and these are pretty straight forward to apply but if you're a novice you need to take special note.
1. Due to the very small linework, you need to be extra careful when you're peeling the transfer tape away from the backing. It's probably a good idea to roll something flat and rounded and rub over the entire design prior to peeling the transfer tape away. Work slowly and make sure the design is attached before peeling too much. Here's a quick example:

^ This is how the vinyl looks before I apply the transfer tape.

^ Transfer tape has been applied (sorry didn't have a pic of the entire thing).

^ Now I'm peeling the transfer tape away while making sure the design is attached. It's a lot easier if you keep a low angle while peeling away.
2. Once you have the transfer tape peeled off and the design is attached you're ready to apply it. You only have one shot at this so make sure you're in a well lit area. If you mess up, there's no turning back so I recommend quad-ruple checking yourself before you make your final decision on where to apply it.
I'll include a set of directions with every order but I thought it may be nice for you to see how it all works before buying.
PM me if you're ready to place an order! Thanks everyone!
$30 shipped (U.S. Only)
*Note - the pickguard pictured has a different color for test purposes only. The kit will not vary in color.




Application: I've been applying vinyl for a while now and these are pretty straight forward to apply but if you're a novice you need to take special note.
1. Due to the very small linework, you need to be extra careful when you're peeling the transfer tape away from the backing. It's probably a good idea to roll something flat and rounded and rub over the entire design prior to peeling the transfer tape away. Work slowly and make sure the design is attached before peeling too much. Here's a quick example:

^ This is how the vinyl looks before I apply the transfer tape.

^ Transfer tape has been applied (sorry didn't have a pic of the entire thing).

^ Now I'm peeling the transfer tape away while making sure the design is attached. It's a lot easier if you keep a low angle while peeling away.
2. Once you have the transfer tape peeled off and the design is attached you're ready to apply it. You only have one shot at this so make sure you're in a well lit area. If you mess up, there's no turning back so I recommend quad-ruple checking yourself before you make your final decision on where to apply it.
I'll include a set of directions with every order but I thought it may be nice for you to see how it all works before buying.
PM me if you're ready to place an order! Thanks everyone!

